How can I save electricity: Simple suggestions that always work
Each month, paying utility bills, each of us comes to mind how to save electricity.
After all, such spending articles are one of the most basic in the average family budget.Housing and communal services tariffs grow over the years, so this question is relevant.
The use of proper lighting products
Where to start saving?Experts recommend replacing standard switches for dimmers.Such devices allow you to adjust the level of light.
After all, some people need continuous light sources in the kitchen, in the bedroom, toilet or bathroom.As a rule, there is relatively small power.
This is especially true for situations when you just go into the room for a minute, watch movies or play computer games.
You can keep saving by simply replacing regular incandescent bulbs with LEDs.They contribute to less energy consumption.
For lamps, although they also contribute to reducing electricity costs, not all experts recommend them.
The fact is that in their manufacture, manufacturers use mercury.
In addition, such lamps provide improper light, which may not affect the vision in the best way and reduce its sharpness.In addition, their service life is not reliable as LED.
Despite the fact that they are quite high, they will quickly pay.Using it, you can save payments.
For example, a 4 W light will be 16 times more economical than a standard 75 watts incandescent lamp.And he will give Sveta the same as the same amount.
Therefore, it is best to spend money on LED lights once than paying several times more.
In addition, according to their manufacturing companies, their validity period is about 30 thousand hours.During the average work process, 4 hours a day, such a lighting section is enough for more than ten years!
In addition, they are safer than normal fires, as they are almost hot.Consider their acquisition as a long investment and investment and they will pay more than.
You can save electricity by increasing the number of light sources throughout the perimeter of the residential.
In this case, it is easy to control the lighting needed.For example, there is no need to turn on light throughout the bedroom or kitchen if you need to light the table.
It's enough to turn on a wall sconce or desktop lamp.
How to use the technique correctly?
Proper selection of equipment and equipment will help minimize the cost of light significantly:
- Remember that in the store you should choose the technique with the "A" of energy consumption classes.This letter means that iron, refrigerator, microwave, and others use a little electricity.Also, the "B" class is not inferior to him.A big mistake will be the acquisition of the device with the "G" class, as it is the most energy.
- The size of the equipment should be selected depending on how many family members live in the apartment.For example, if the family is made up of two people, do not buy a washing machine with a load of 5 kg.In addition, in this case, you need to spend additional electricity, launching a half unit.This also applies to strong refrigerator purchases, which is not needed in the family of two people.
Remove the electrical equipment completely if you do not use it for several periods.Remember that the fork from the socket should always be turned off after the device!This is due to the fact that home appliances use electricity even in standby mode.Spend the same manipulation with chargers for phones, laptops and other devices.
Proper use of refrigerator to eliminate unnecessary expenses
When choosing refrigerators in the store, give priority to what does not have a frost function.Techniques with the same sign will significantly reduce electricity consumption.
It is best to put the fridge in the coldest in the kitchen.Installation of equipment elements near the kitchen will be wrong.It is recommended to place it outside the room.
It is he who is always bigger than others.This will allow the refrigerator to be less hot.
For refrigerators, it is best to fill with the product.This supports the temperature of the electrical engineering given is normal.
In addition, make sure the refrigerator and refrigerator doors are always closed.
No need to put hot drinks, soups and other liquids on the refrigerator shelf.Leave food on a plate, pot or in a self -cooled pan.It is free and you do not have to spend power, and thus pay extra for extra kilowatts spent.Keep in mind that milk, juice, soup and other liquids should always be closed.Otherwise, moisture will evaporate, which will cause energy consumption.
Kitchen slabs will help save
When buying an apartment, buy a gas stove.Providing food on it is more profitable than that works for electricity.
You can also reduce payments with receipts through the use of induction kitchens.
He has the smallest energy consumption, as this household appliance only heats the bottom of the pan, crater or pot.And in normal tiles, the burner heats up.
In addition, keep in mind that the diameter of the dish for the preparation of various dishes should be slightly more than the baking or matching it.
This will allow you to get better heat transfer as it is closer to the burner.Cooking with a covered lid will help not rotate electricity.
This method will heat the food in the dish, not the air in the kitchen.
Always turn off the kitchen 5 minutes before the meal is prepared.Cook at high temperatures for early heating, and then reduce it.
This dish will achieve readiness and without the use of additional energy costs.
It is advisable to bring boiling water to the gas, as the kettle that works from the network uses a lot.In addition, when working, it is involved in very high power.
We wash, iron and keep
When choosing washing mode, keep in mind that most powders contain special components basically and delete the pants well at low temperatures.
Therefore, there is no need to set it maximum.The same rule applies to the big revolution.In addition, do not launch a half washing machine.It is best to save Linen until fully loaded.
Waste heat can be used during ironing.To do this, 10 minutes before the end of this procedure, turn off the iron.The device will be hot all this time.
Lay foil food on the ironing board.This will not spend electricity to heat the surface.
Another effective method
The following suggestions will help minimize expenses:
- When the room is decorated (choosing furniture, wallpaper, floor, ceiling and wall painting), gives priority to light tones.After all, the more colors are lighter, the more light is reflected.In addition, to obtain a normal level of lighting, more or less electricity is required.
- The next suggestion will be shallow, but with its help, you can also reduce the cost of receipt.To save electricity, you need to wash the windows more often (depending on their level of pollution).The fact is that the contaminated glass always passes almost half the sun and the natural light.As a result, it is necessary to configure dimmers at high power.Bulbs must also be removed from dust at least 2 times a month.In this case, everything depends on the level of pollution.
- If you are going to buy housing, consider that the south is the brightest.This means that during the day additional lighting is not required.
- Before you turn on a breakdown or air conditioning system, you need to make sure that there is no draft at home.Otherwise, such techniques will heat the road, not a room.Choose air conditioning, based on room size.This will pay less light.To turn on as many heaters as possible, you can put windows from plastic.Although this fun is not cheap, for years -it will pay completely.
Outdated TV or computer monitor is better changed for newer (LED, etc.).In old style techniques there is a large level of energy consumption.
Modern techniques use little electricity.Also do not turn on the scanner, the printer does not need.